DS-1259ZJ

DS-1259ZJ  Inclined ceiling mount for DS-2CD21XX dome camera  Features:   Good toughness and strength   Beautiful design with wire outlet hole   Coordination with small and nice appearance   Angle of elevation is increased by 15°  Dimension:      Order model:  DS-1259ZJ  Parameters:  Model  Parameters  DS-1259ZJ  Suitable for DS-2CD21XX series dome cameras  Color Hik white  Feature Suitable for DS-2CD21XX series dome cameras  Angle of elevation is increased by 15°  Material ABS+PC  Dimension Φ111x39.2mm(Φ4.37’’x1.54’’)  Weight 200g(0.44lbs)  Notice:   This bracket is only for DS-2CD21XX series dome camera   Pay attention to the application range when select bracket   Pay attention to the color matching when select bracket   The bracket should be installed on flat wall   The wall must be capable of supporting more than 3 times the total load of  the camera and the mount.   The maximum load capacity of the mount is 2.0KG  Installation steps:  ① Select suitable wall to install the bracket ② Loosen the tightening screw and take down ③ Install the dome core to the gang box, <...

Warranty: 36 mon.

Datasheet 

Text contents of PDF datasheet:

DS-1259ZJ
Inclined ceiling mount for DS-2CD21XX dome camera
Features:
 Good toughness and strength
 Beautiful design with wire outlet hole
 Coordination with small and nice appearance
 Angle of elevation is increased by 15°
Dimension:


Order model:
DS-1259ZJ
Parameters:
Model
Parameters
DS-1259ZJ
Suitable for DS-2CD21XX series dome cameras
Color Hik white
Feature Suitable for DS-2CD21XX series dome cameras
Angle of elevation is increased by 15°
Material ABS+PC
Dimension Φ111x39.2mm(Φ4.37’’x1.54’’)
Weight 200g(0.44lbs)
Notice:
 This bracket is only for DS-2CD21XX series dome camera
 Pay attention to the application range when select bracket
 Pay attention to the color matching when select bracket
 The bracket should be installed on flat wall
 The wall must be capable of supporting more than 3 times the total load of
the camera and the mount.
 The maximum load capacity of the mount is 2.0KG
Installation steps:
① Select suitable wall to install the bracket ② Loosen the tightening screw and take down ③ Install the dome core to the gang box,
and wire. the housing. wire and lock the screw.

② Adjust the angle through the 3-axis adjustment ⑤ Install the housing and lock the screws. ⑥ Finish the installation.
structure.

Remark: Appearance of Installation steps is for reference only